- Directed QA/QC activities on a major onshore LNG processing facility, ensuring compliance with project-specific quality management systems and LNG liquefaction module fabrication standards. - Developed and implemented Procurement and Construction Surveillance Programs aligned with FPSO turret module, topside processing systems, and cryogenic LNG piping system specifications. - Oversaw the performance of EPC Contractors across cryogenic tanks, process skids, flare systems, and utility infrastructure. - Established surveillance and inspection schedules for modularized LNG process units and FPSO integration scope to ensure compliance with ISO 9001:2015 and client specifications. - Conducted internal and supplier audits focusing on ASME B31.3 piping, pressure vessels, API 620/650 tanks, and structural fabrication in line with LNG plant specifications. - Provided quality input on the qualification and approval of WPS/PQR/WQT related to carbon steel, stainless steel, and Inconel alloy welds used in LNG service and offshore FPSO topsides. - Ensured the systematic review and approval of contractor documentation including ITPs, QCPs, and test packages for high-pressure gas piping systems. - Implemented lessons learned and managed NCRs, CARs, and DRs relating to LNG plant utilities, boil-off gas systems, and FPSO mooring system installations. - Collaborated with engineering to ensure quality integration of LNG cold box, compressor skids, and rotating equipment into project handover packages. - Supported the development and digital management of project quality documentation using SmartPlant and Aconex platforms. - Spearheaded vendor quality surveillance for long-lead equipment such as LNG cryogenic pumps, heat exchangers, and offshore turret systems.

- Managed QA/QC operations across the modular yard fabrication scope for FPSO topsides and onshore LNG process modules, with direct accountability for structural, piping, mechanical, and E&I quality. - Supervised the fabrication and assembly of FPSO subdecks and main deck structures, including plate cutting, fit-up, welding (GTAW, SMAW, FCAW), and NDE of load-bearing modules as per ABS, DNV, and ASME Section IX codes. - Oversaw the complete deck erection sequence, including module interfacing, skids alignment, and dimensional control using laser scanning and Total Station technology. - Led QA/QC surveillance for mechanical equipment installation—compressors, heat exchangers, pressure vessels, and cryogenic pumps—ensuring baseplate alignment, grouting, soft-foot checks, and final torqueing adhered to OEM and project specifications. - Monitored piping installation activities for high-integrity hydrocarbon systems (carbon steel, stainless steel, Inconel), including flange face preparation, gasket control, bolt tensioning, and hydro/pneumatic testing of cryogenic and high-pressure LNG piping as per ASME B31.3 and project ITPs. - Ensured quality compliance in electrical and instrumentation (E&I) works, including cable tray installation, cable pulling, glanding and termination, loop checks, grounding systems, and testing/calibration of field instruments and control systems. - Led audits and inspections across fabrication shops, paint booths, mechanical rooms, and E&I zones, driving strict adherence to ISO 9001:2015, ATEX, and IECEx standards for hazardous area installations. - Coordinated closely with fabrication, commissioning, and logistics teams to execute sail-off readiness checks, module lifting and transport loadout inspections, sea-fastening QA, and preservation protocols for offshore-bound FPSO modules. - Participated in punch list walkdowns and ensured resolution of all open QA/QC items before issuing the Mechanical Completion and Ready for Sail-off (RFS) certificates. - Prepared and reviewed quality dossiers and as-built packages for turnover to offshore installation teams, ensuring traceability for all welds, materials, NDE records, function tests, and redlined drawings.

 Undertake the role of Management Representative in communicating with customer and other interested parties on matters pertaining to QMS.  Record minutes of MR meeting monitor the implementation and effectiveness of all actions and plans and endorse upon completion.  Ensure compliance of the QMS interpreted within ISO by its periodic audit plan.  Maintain company's quality records and implement measurements to improve quality  Lead the audit team in internal quality audits with QA/QC Manager and Internal Auditors  Review qualification of WPS/PQR/WQR as per ASME section IX, PSTS as well as GOST requirements.  Liaise with Clients and third-party inspection agencies  Guide QC personnel on calibration matters and record maintenance  Guide and train QA/QC personnel for current requirements and for any future requirements.  Review quality inspection reports  Coordinate for inspection and testing activities performed by the company or by a third-party agency.  Follow-up CA /PA Requirements. Internal, External NCRs trend analysis. Effective contribution during the development of detailed design and equipment/material procurement and ensure constructability of design and conducting FAT / SAT to satisfy such requirements  Perform any other related duties as assigned by QA/QC Manager

- Undertake the role of Management Representative in communicating with customer and other interested parties on matters pertaining to QMS. - Ensure compliance of the QMS interpreted within ISO 9001:2015 by its periodic audit plan. - Preparation of Inspection and Test Plan, Quality procedures - Maintain company's quality records and implement measurements to improve quality - Lead the audit team in internal quality audits with QA Supervisor and Internal Auditors - Review qualification of WPS/PQR/WQR as per ASME section IX, PSTS as well as GOST requirements. - Guide QC personnel on calibration matters and record maintenance - Guide and train QA/QC personnel for current requirements and for any future requirements. - Review quality inspection reports - Ensuring all external specification relevant to the company are maintained and updated accordingly. - Responsible for all inspection and testing activities performed by the company or by a third party agency. - Co-ordination with external certification bodies. - Perform any other related duties as assigned by the Top Management.

 Responsible for the overall quality of the works being delivered by the site construction team and to achieve the Quality Target.  Preparation of Project Quality Assurance Plan to govern all phases of the project and ensuring the project have complied with the approved installation / erection procedures, method statements and risk assessments, and that the plant is inspected and tested in accordance with approved ITP, Clients Specification and other International Standards like ASME, ANSI, AWS, API,BS etc.  Ensuring compliance with GOST & SNiP with Technical supervision, Author supervision & Regulatory Authorities representatives.  Providing quality training & awareness on quality activities planned on site. Raising Site Engineering Query / Request for Information to consultant for deviations on scope of project / impact on schedule which was not described in project document and raised during Monitoring of above and under ground welding operations.  Preparation of Method Statements, Procedures, Work Instructions  Visual inspection of completed welds & monitoring use of weld procedures to ASME Section IX or AWS D1.1. & notifying to Third Party for NDE as per ASME Section V or AWS D1.1  Monitoring of pipeline front-end welding activities.  Checking of pipe bevel irregularities/damage and joint set-up prior to welding.  Checking that welding parameters are in accordance with WPS.  Checking the condition of welding electrodes.  Monitoring of tie-in / special crossing / repair welding, hot-tap activities as above.  Monitoring of pipe stringing activities to ensure correct support and coating protection.  Monitoring post weld heat treatment activities (PWHT)  Monitoring of pipe bending activities.  Assists and participates in inspecting plant stationary equipment as assigned, including pressure vessels, columns, drums, heat exchangers, boilers, coolers, tanks, valves and piping systems throughout the plant.  Assist in testing and certifying welders and welding procedures.  Carries out as required non-destructive tests using the required instruments, tools and NDT equipment.  Prepares inspection reports with all findings, abnormalities and recommendations.  To observe the requirements of applicable inspection and test plans and to sign off such plans and in accordance with predetermined intervention annotations.  Monitoring the progress with completions department on signed off documents and advising construction Department to expedite if there is any delay.  Responsible for creating an effective work environment within the project team and ensuring teamwork, staff development and motivation.  Establishing & Managing the Project Quality control process including audits, reviews etc., in order to ensure that project objectives are met. Ensuring follow up and appropriate close out of all review actions items.  Being a Lead Auditor by IRCA for QMS ISO 9001:2008, I am Approving and supervising internal and external audit program on site.  Promoting Quality culture on site, ensuring implementation of best practices and continuous Improvement of QMS System.  Follow-up CA /PA Requirements. Internal, External NCRs trend analysis.  Effective contribution during the development of detailed design and equipment/material procurement and ensure constructability of design and conducting FAT / SAT to satisfy such requirements.

 Reporting to the QA/QC Manager in day to day progress of work.  Coordination with Site Engineers and Site Supervisors in day to day works.  Coordination with Consultant QA/QC for the field-testing and obtain approvals.  Co-ordination with engineering department for preparation of Mechanical services drawings and architects drawing involving MEP, HVAC, Fire Fighting, Fire Alarm, Plumbing, Fire Alarm etc.  Reviewing the drawing as per applicable specification, scope of contract and all applicable regulations.  Reviewing the clashes between services and suggesting corrective action on site, implementing on as built.  Raising Site Engineering Query / Request for Information to consultant for deviations on scope of project / impact on schedule which was not described in project document and raised during construction.  Coordinating with Quality Assurance/Quality Control department for daily inspections as per Inspection and Test Plan and as per contract conditions including issuance of requests for inspection and coordination and management of all the site inspection and test at work  Coordination with Subcontractor’s site staff for all related activities.  Installation of MEP Building Services in accordance with the Contract Specifications and drawings in accordance with BSTM, ANSI.  Slab openings as per builders work and HVAC drawing.  Shop drawing submittal and approval of ducting and chilled water piping drawing.  Erecting of ducting like fresh air, supply air, return air, toilet & kitchen exhaust air ducts as per approved shop drawing by consultants.  Erection of chilled water piping like supply and return with rubber insulation and cladding as per consultant.  Testing and commissioning of all ducts and chilled water pipes and pumps.  Submittal and approval of material and equipment as per specification.  Monitoring site store, assuring safe storage and handling of site material.  Coordinating with supplier for material requirement as per delivery schedule.  Installation of chiller, FAHU, AHU, FCU, chilled water pumps as per the installation detail and as per site condition.  Monitoring the Mechanical scope of works for conformance with the provisions of the contract documents and the procedures manual.  Coordinating and supervising the work of all Mechanical activities and operations.  Reviewing the contractor’s project record documents relevant to their discipline.  Assisting with the inspection of completed works and monitoring the start-up, testing, commissioning and handover of the Mechanical works.  Follow-up CARs. Internal, External NCRs trend analysis.  Signing off on completed Mechanical works with completed documentation.  Perform all other duties given by Project Director & QA/QC Manager.

 Reporting to the QA/QC Manager in day to day progress of work.  Ensuring response to necessary construction documentation, including but not limited to review of shop drawings, RFIs, and material submittals.  Managing the efforts of the Mechanical inspectors to ensure all documentation that is reviewed is than properly translated into a constructed product which meets requirements and specifications.  Ability to review and comment properly on necessary documentation.  Monitoring the Mechanical scope of works for conformance with the provisions of the contract documents and the procedures manual.  Reviewing, approving and processing all Mechanical technical submittals.  Answering RFI’s related to Mechanical.  Coordinating and supervising the work of all Mechanical activities and operations.  Reviewing contractor’s Mechanical change order proposals and preparing recommendations to MEP PM.  Liaison with the necessary sub consultants.  Reviewing contractors claims related to Mechanical works and preparing recommendations for claims.  Reviewing the subcontractor’s project record documents relevant to their discipline.  Managing the Mechanical inspectors.  Analyzing laboratory and testing reports.  Assisting with the inspection of completed works and monitoring the start-up, testing, commissioning and handover of the Mechanical works.  Analysis for repair in weld, controls of calibration equipment’s.  Follow-up CARs. Internal, External NCRs trend analysis.  Signing off on completed Mechanical works with completed documentation.  Perform all other duties given by Project Director & QA/QC Manager.

 Reporting to the QA/QC Manager in day to day progress of work.  To review contract documents to identify quality requirements, ensure the quality system is implemented and maintained, monitor, inspect and report on all mechanical WA to ensure compliance with specifications.  Monitoring of above and under ground welding operations.  Checking welding parameters.  Checking that correct WPS is in use.  Checking of pipe bevels/joint fit up.  Checking equipment installations.  Painting and Coating Inspection.  Preparation of Method Statements, Procedures, Work Instructions, Daily Welding Report  Visual inspection of completed welds & notifying to Third Party for NDE as per Design Requirement..  NDE - RT, PT and MT inspection of completed welds.  Monitoring of pipeline front-end welding activities.  Checking of pipe bevel irregularities/damage and joint set-up prior to welding.  Checking that welding parameters are in accordance with WPS.  Checking the condition of welding electrodes.  Monitoring of tie-in / special crossing / repair welding, hot-tap activities as above.  Monitoring of pipe stringing activities to ensure correct support and coating protection.  Monitoring post weld heat treatment activities (PWHT)  Monitoring of pipe bending activities.  To observe the requirements of applicable inspection and test plans and to sign off such plans and associated checklists in accordance with predetermined intervention annotations.  Preparation of Construction Quality Inspection as per job requirement and coordinating with client QA/QC Representative & Construction Representative for Inspection and approval.  Monitoring the progress with completions department on signed off documents and advising construction department to expedite if there is any delay.  Preparation of Technical Piping passport (TPP) in accordance with Hydro test requirement and specification.  Review of as built drawings.  Signing off on completion of Instruction to Contractor & Work Request after client Inspection.  Preparation of turnover dossier and all related documents as per project / contract requirement.

Mechanical Engineering

NOSTROY, REGISTERED C-IN-201690

NAKS RUSSIA, LEVEL III

SERTNIK MOSCOW, LEVEL II (VT, RT, UT, PT, MT)

American Welding Society

INDTT Mumbai India, RT, UT, PT, MT

BSI, India, Quality Management System (ISO 9001:2015)

BSI, India, Quality Management System (ISO 9001:2008)